Nafasi za Kazi 25 Shirika la Reli Tanzania (TRC)

The total number of job posts listed here for the Tanzania Railways Corporation / Shirika la Reli Tanzania (TRC) is 25 posts in August 2026.

This railway infrastructure, mechanical maintenance, locomotive operation, and technical training recruitment targets locomotive drivers, engineers, specialized technicians, electrical artisans, and technical instructors across TRC operations.

Shirika la Reli Tanzania (TRC)

Vacancies: 25  |  Latest closing: 10/09/2026

LOCOMOTIVE DRIVER II

Posts: 10  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 3

Duties and Responsibilities

• To perform shunting duties within the station yards, sidings and running depots within the home station.
• To perform shunting duties within the station yards, sidings and running depots within the home station.
• To check the locomotive fitness before use.
• To report any problem noted in the locomotive during the course of driving.
• To record all important events occurring during shunting.
• Recording the fuel balance on start and at the end of the shunting duties.
• To perform any other related duties that may be assigned by the supervisor.

Qualifications

Holder of a Form IV academic Certificate with 2 years Locomotive Driving Certificate or Locomotive Shunting Certificate offered by TIRTEC or any recognized Institution and Class F or G Driving License.

Apply for this position

ENGINEER II (SIGNAL &TELECOMMUNICATION)

Posts: 1  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 6

Duties and Responsibilities

• Assist in maintenance of S &T equipment and systems.
• Assist in installation of SGR, MGR signals and Telecommunication network and equipment.
• Assist in preparation of specifications for procurement of signal and telecommunication equipment and gadgets.
• Preparation of technical plans and designs for signal and telecommunication projects.
• Preparation and submission of periodical technical reports.
• Performs any other related duties as assigned by supervisor.

Qualifications

Holder of Bachelor Degree in Electrical Engineering, Electrical Engineering, Telecommunication Engineering, Electronics Engineering or equivalent from recognized institution and has been registered by Engineers Registration Board as Graduate Engineer.

Apply for this position

TECHNICIAN II (HYDRAULIC MACHINERIES)

Posts: 2  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 3

Duties and Responsibilities

• Undertake maintenance of rolling stock and locomotives;
• Maintenance of workshop machinery and plants;
• Service of refrigeration and air condition facilities;
• Service Mechanical handling equipment and ancillary plants;
• Help supervisor to maintain records;
• Perform any other duties as may be assigned by supervisor.

Qualifications

Holder of Form IV/VI with Full Technician Certificate (FTC) Or Ordinary Diploma in mechanical with specialization on hydraulic machineries, or Equivalent from any recognized institution.

Apply for this position

TECHNICIAN II (AUTOMOBILE)

Posts: 4  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 3

Duties and Responsibilities

• Supervise and participate in maintenance and repair of plants, machinery, motor vehicles, and construction equipment.
• Performing routine maintenance such as oil and brake changes
• Repairing or replacing worn, old or defective car parts and testing systems after repairs
• Maintaining detailed repair records to support invoicing and customer support
• Communicating with service advisors about diagnosed problems, necessary repairs and repair timelines
• Ensuring tools and work areas are clean, operational and safe
• Keeping up with new automotive technology and repair best practices

Qualifications

Holder of Form IV/VI with Diploma/NTA Level 6 in Automobile Engineering/Automotive Mechanics or relevant qualifications from Recognized Institution.

Apply for this position

ARTISAN II (AUTO ELECTRIC)

Posts: 5  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 1

Duties and Responsibilities

• Install, maintain, and repair electrical systems of plants, machinery, and motor vehicles.
• Diagnose and rectify electrical faults in equipment and machinery.
• Carry out preventive maintenance of electrical components.
• Test and replace faulty electrical parts and systems.
• Support installation and commissioning of electrical equipment.
• Perform any other relevant duties as may be assigned by the supervisor

Qualifications

Holder of Form IV Certificate with CBET Level II/III Certificate or Trade Test Grade I/II Certificate or NVA II/III in Auto Electric or equivalent qualifications from a recognized institution.

Apply for this position

INSTRUCTOR II (MECHANICAL ENGINEER)

Posts: 1  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 6

Duties and Responsibilities

• To conduct short Courses and Seminars in respective areas of specializations, Instructional methods course (Pedagogical);
• To prepare Course/Lesson Plans for respective subjects of specializations;
• To supervise students on practical training;
• To follow up and submits post training evaluation on trainees.
• To plan and organize Traffic programmes;
• To conduct Courses and Seminars for senior staff of the Corporation;
• To collect and analyze information and data related to the fields of specialization;
• To audit training objectives and Courses contents and recommends to the principal training equipment’s and materials required;
• To evaluate effectiveness of instructors under him and makes appropriate reports to the principal. Conducts research pertaining to instructional needs in and outside TRC and conducts consultations and researches on training matters in liaison with districts and headquarters officers;
• To perform any other duties as assigned by his superior.

Qualifications

Holder of Bachelor’s Degree (NTA Level 8 or equivalent) in Bachelor Degree in Mechanical Engineering or equivalent in relevant fields with a minimum GPA of 3.5 from recognized institution, eligible for registration as a technical teacher and registered by respective Board as Graduate Engineer/Professional

Apply for this position

INSTRUCTOR II (CIVIL ENGINEER)

Posts: 1  |  Closing: 10/09/2026  |  Period: 28/08/2026 - 10/09/2026  |  Scale: TRCS 6

Duties and Responsibilities

• To conduct short Courses and Seminars in respective areas of specializations, Instructional methods course (Pedagogical);
• To prepare Course/Lesson Plans for respective subjects of specializations;
• To supervise students on practical training;
• To follow up and submits post training evaluation on trainees.
• To plan and organize Traffic programmes;
• To conduct Courses and Seminars for senior staff of the Corporation;
• To collect and analyze information and data related to the fields of specialization;
• To audit training objectives and Courses contents and recommends to the principal training equipment’s and materials required;
• To evaluate effectiveness of instructors under him and makes appropriate reports to the principal. Conducts research pertaining to instructional needs in and outside TRC and conducts consultations and researches on training matters in liaison with districts and headquarters officers;
• To perform any other duties as assigned by his superior.

Qualifications

Holder of Bachelor’s Degree (NTA Level 8 or equivalent) in Bachelor Degree in Civil Engineering or equivalent in relevant fields with a minimum GPA of 3.5 from recognized institution, eligible for registration as a technical teacher and registered by respective Board as Graduate Engineer/Professional.

Apply for this position